This guide explains to you how to install and register the Thinfinity Remote Desktop Server v4.0.
Installing Thinfinity Remote Desktop Server for the first time is pretty simple. It is pretty much a “next, next” installation.
There are just a few things you have to take into account. Let’s see check the installation steps:
1. Open up the setup file (previously downloaded from this page), on the first screen just click Next:
2. Click “I accept the terms in the license agreement” and then “Next”:
4. If you wish to choose a different folder press “Change”, otherwise you can go to “Next” directly:
5. Hit “Install”.
6. After it ends, press “Finish”.
In your start menu, you should have a new icon for “Thinfinity Remote Desktop Server Manager”.
Given that it’s the first time you use the software, the first screen you will see is:
Select “Get a new Trial Serial Number” and press “Next”.
Fill your name and e-mail address and press “Next”, make sure this PC has internet access, otherwise contact sales\cybelesoft.com so they can provide you with a trial key:
You should instantly get an e-mail with a trial key and will be redirected to the screen below where you can enter this information:
If the registration was successful, you’ll see:
If not, please contact email@example.com
Just hit “Finish” and you’ll see your license registered:
Now you should be good to go 🙂
If you need any assistance configuring Thinfinity Remote Desktop Server manager or the Gateway manager, please contact firstname.lastname@example.org.